Bitcraze Forums

Posted: **Mon Apr 18, 2022 12:55 am**

Hi, Bitcraze!!
I'm Japanese college student.

I'm assembling big quadrotor with big quad deck.
And my esc does not have 5v output. Only have signal and GND.
So I try to supply big quad deck with 5v power to from PDB.

Now my question is where should I connect 5v output and GND on the big quad deck.
I read this topic and I think this looks like it's done.

viewtopic.php?p=23637&hilit=bigquad#p23637

thanks in advance.

Posted: **Tue Apr 19, 2022 11:22 am**

Hi!

You can connect the 5V to any free pin marked 5V on the bigquad deck. And the same with ground.

Posted: **Tue Apr 19, 2022 12:20 pm**

Thank you for your reply very much!!

I connect crazyflie and bigquad deck like below.

And I use Buzz pin like below.

I connected 5V to Buzz pin but crazyflie didn't start.
Is this correct?

I connect USB to crazyflie and cfclient console show this message.

Must the motor be connected to the Bigquad deck?
Please help me.
Thanks.

Posted: **Wed Apr 20, 2022 5:20 am**

Hi bitcraze.
I got it!!
Crazyflie Started!

Thanks!!

Bitcraze Forums

[SOLVED]How to supply big quad deck with 5v power from PDB

[SOLVED]How to supply big quad deck with 5v power from PDB

Re: How to supply big quad deck with 5v power from PDB

Re: How to supply big quad deck with 5v power from PDB

Re: How to supply big quad deck with 5v power from PDB