Page 1 of 2
Wifi video streamer
Posted: Tue Oct 06, 2020 6:33 am
by JaeDeok
https://github.com/bitcraze/AIdeck_exam ... treamer.md
I would like to check out the Wifi video streamer by referring to this link. Should I do both GAP8 and NINA?
Re: Wifi video streamer
Posted: Tue Oct 06, 2020 7:34 am
by kimberly
It depends on the source of your AIdeck purchase, but yours should be preflashed with the wifi video streamer already. See
https://github.com/bitcraze/AIdeck_exam ... /tryout.md and you can use the python viewer in the nina folder
You can check if there is a wifi hotspot called
Bitcraze AI-deck Example, but if you don't you should probably first try out flashing Gap8 and then the Nina. The instructions of those should be in the doc but let us know if there is anything that is not clear (The aideck is still in early release).
Re: Wifi video streamer
Posted: Tue Oct 06, 2020 8:03 am
by JaeDeok
crazyflie에 AI_Deck을 연결하고 전원을 넣었지만, wifi는 찾을수 없었습니다.
https://github.com/GreenWaves-Technologies/gap_sdk
위 링크를 참고하여. GAP8 SDK 를 설치하는 과정이 매우 어렵습니다.
https://github.com/bitcraze/AIdeck_exam ... started.md
After minimal installation, I executed the "make" commands described in the following link,
"make gap_tools" could not find opencv module in python,
"make pulp_tools" is not included in the make command.
Re: Wifi video streamer
Posted: Tue Oct 06, 2020 9:04 am
by raven
Yes, I think there should be more detailed information mentioned in the docs, especially for the fresh man~hh
I'd like to post some PR for the project.
I met another problem, just about the required hardware.
I am not very clear about what I need.
Re: Wifi video streamer
Posted: Tue Oct 06, 2020 9:07 am
by raven
Maybe an instant chat group like WhatsApp or Telegram is a good choice for the early access products like the AI-deck
We, the early users could get more useful info and help you promote the product!
Re: Wifi video streamer
Posted: Tue Oct 06, 2020 11:52 am
by kimberly
It seems that those make targets do not exist for SDK 3.7, so we should remove those. Probably just make SDK should be enough, so just follow the readme of the SDK itself
This would be a good issue for the
github repo btw, since we need to change this in the actual documentation.
To be honest, we started working with docker ourselves which is much easier for us to manage. Maybe it would be good to try it as well, if you are using an ubuntu computer. Greenwaves use a virtual machine themselves.
@raven, About whatsapp or wechat, we have a policy to not use this for support. Also it will be impractical for the huge time differences of our users. For development discussions, github is the best and either use this forum for support. We are a small company but we try to answer almost everyday.
Re: Wifi video streamer
Posted: Wed Oct 07, 2020 2:34 am
by JaeDeok
Unlike the development environment, is there a way to purely flash?
I can't figure out the exact location to flash GAP8 and NINA. (File location and flash location)
Also, it is difficult to use because the method of using Docker is inexperienced.ㅠㅠㅠ
Re: Wifi video streamer
Posted: Wed Oct 07, 2020 6:35 am
by JaeDeok
추가적으로 docker를 이용하여 밑에 명렁어를 실행하였습니다.
docker run --rm -it -v $PWD:/module/ --device /dev/ttyUSB0 --privileged -P espidf:3.3.1 /bin/bash -c "make menuconfig; make clean; make all; /openocd-esp32/bin/openocd -f interface/ftdi/olimex-arm-usb-tiny-h.cfg -f board/esp-wroom-32.cfg -c 'program_esp32 build/partitions_singleapp.bin 0x8000 verify' -c 'program_esp32 build/bootloader/bootloader.bin 0x1000 verify' -c 'program_esp32 build/ai-deck-jpeg-streamer-demo.bin 0x10000 verify reset exit'"
그림과 같이 되었는데 문제가 무엇입니까?
Re: Wifi video streamer
Posted: Wed Oct 07, 2020 6:54 am
by raven
kimberly wrote: ↑Tue Oct 06, 2020 11:52 am
It seems that those make targets do not exist for SDK 3.7, so we should remove those. Probably just make SDK should be enough, so just follow the readme of the SDK itself
This would be a good issue for the
github repo btw, since we need to change this in the actual documentation.
To be honest, we started working with docker ourselves which is much easier for us to manage. Maybe it would be good to try it as well, if you are using an ubuntu computer. Greenwaves use a virtual machine themselves.
@raven, About whatsapp or wechat, we have a policy to not use this for support. Also it will be impractical for the huge time differences of our users. For development discussions, github is the best and either use this forum for support. We are a small company but we try to answer almost everyday.
Thanks!
Re: Wifi video streamer
Posted: Wed Oct 07, 2020 6:54 am
by kimberly
The flash location of the AIdeck for the Nina can be found here:
https://github.com/bitcraze/AIdeck_exam ... ramming.md
Also check on which USB port your programmer is with dmesg (on ubuntu). You might need to change that line in the docker command.