Crazyflie iphone app crashs when trying to connect to CF2

[z506]

Hello everyone!

I just finished assembly my new CF2, the initial hardware test passed, and now when I turn it on is in connection mode LED M2 and M3 are in blue and M1 blinking on Red.

When I hit the connect button on the CrazyFlie 2.0 iphone app on my iphone 6S Plus (running iOS 9.2.1) the progress bar gets until the center, and after 10 or 15 seconds the application crashes and close.

Is this a known bug? there's any workaround ?

If you need more details, I'll be glad to provide more informations.

Thanks,
Yoel.

[z506]

Sorry for the double post but I was able to solved the issue by my self.

This is what I did:

1. Turn bluetooth off on the iphone.
2. Closed the Crazyflie App
3. Turn bluetooth on.
4. Try again. (did not worked)
5. Shutdown the phone.
6. Turn the phone on again
7. Open the Crazyflie app
8. Enjoy !

[chad]

Not a double-post at all. A solution to a problem!! Sounds like BLE choked on the iPhone. Glad to read you got it solved and many thanks for posting your solution!!