Only M2 light was on
Posted: Mon Aug 30, 2021 6:25 am
Dear all,
I am using crazyflie bolt. After I connected the ESC -> ESC connector -> crazyflie bolt then I powered the crazyflie bolt with a 12v battery.
I measured the voltage from ESC, but accidentally I short the ESC module and then the lights of crazyflie bolt are all turned off.
After I push the button on the crazyflie bolt agaion. It only showed the M2 led light. As I shown below:
1.png
Also, the STM32 chip turned super hot when I give the power to the crazyflie bolt.
Could anyone help me to recovery it. Thank you so much.
Cheers!
I am using crazyflie bolt. After I connected the ESC -> ESC connector -> crazyflie bolt then I powered the crazyflie bolt with a 12v battery.
I measured the voltage from ESC, but accidentally I short the ESC module and then the lights of crazyflie bolt are all turned off.
After I push the button on the crazyflie bolt agaion. It only showed the M2 led light. As I shown below:
1.png
Also, the STM32 chip turned super hot when I give the power to the crazyflie bolt.
Could anyone help me to recovery it. Thank you so much.
Cheers!