flow deck v2 error
flow deck v2 error
Hello,
I have been using crazyflie and I noticed that it works perfectly without flow deck v2. When I attatch flow deck v2, crazyflie starts blinking five times red. I ordered another flow deck v2 and it happens the same thing. I have a multi-range in the top and I attached the flow deck in the bottom. I also made sure the arrows are facing the right way.
I am following this website: https://www.bitcraze.io/documentation/t ... ng-bundle/
I have been using crazyflie and I noticed that it works perfectly without flow deck v2. When I attatch flow deck v2, crazyflie starts blinking five times red. I ordered another flow deck v2 and it happens the same thing. I have a multi-range in the top and I attached the flow deck in the bottom. I also made sure the arrows are facing the right way.
I am following this website: https://www.bitcraze.io/documentation/t ... ng-bundle/
Re: flow deck v2 error
Hi!
Some questions to understand more about your situation:
- Are both your crazyflie and flowdeck completely new?
- Are the pins bended or not connecting fully in anyway?
- Could you see an error in the console tab in the cfclient ? (view/tabs/console)
For the last point, you need to connect the crazyflie by usb. Start the crazyflie up and immediately connect to the crazyflie through USB to get a readout.
Some questions to understand more about your situation:
- Are both your crazyflie and flowdeck completely new?
- Are the pins bended or not connecting fully in anyway?
- Could you see an error in the console tab in the cfclient ? (view/tabs/console)
For the last point, you need to connect the crazyflie by usb. Start the crazyflie up and immediately connect to the crazyflie through USB to get a readout.
Re: flow deck v2 error
yes they are both new.
They are both all the way through and the pins are leveled.
They are both all the way through and the pins are leveled.
Re: flow deck v2 error
Looks like a problem with the Vl53L1 sensor on the Flow deck but it is unlikely that it is a problem on two Flow decks. Also the same sensors works on the Multiranger deck so no buss issue. I'm leaning towards a software error, possibly we have a bug on the master branch. Can you try with:
- The latest release 2021.03
- With only the Flow v2 deck mounted and see if you get the same error.
Re: flow deck v2 error
I attached an image with only the flow deck v2.
By latested release do you mean "bitcraze"? I went to this page https://github.com/bitcraze/bitcraze-vm/releases/ and downloaded 2021.04 .
By latested release do you mean "bitcraze"? I went to this page https://github.com/bitcraze/bitcraze-vm/releases/ and downloaded 2021.04 .
Re: flow deck v2 error
hello,
I believe I found a similar post. Do you think I have the same problem as viewtopic.php?t=3218 .
If so is there a video of how to fix it? I am more of a visual learner.
I believe I found a similar post. Do you think I have the same problem as viewtopic.php?t=3218 .
If so is there a video of how to fix it? I am more of a visual learner.
Re: flow deck v2 error
I tried to pus the "tongues"' out and run it again but it is still failing.
-
- Bitcraze
- Posts: 630
- Joined: Tue Jun 30, 2015 7:47 am
Re: flow deck v2 error
Tobias was referring to the latest release of the Crazyfle firmware (https://github.com/bitcraze/crazyflie-firmware/releases). It looks like you are using a later version compiled from source code and it would be interesting to see if the problem also exists with the 2021.03 to rule out software problems.The latest release 2021.03
The easiest way to flash the 2021.03 version to your Crazyflie is to use the bootloader option in the python client, see https://www.bitcraze.io/documentation/r ... re-upgrade.
Re: flow deck v2 error
I took off the flow deck v2 and then did the update. Did I had to leave it on or was is suppose to be without decks?
I am still have some errors, but not as much as before.
I am still have some errors, but not as much as before.
Re: flow deck v2 error
Does anyone know what the problem could be?