Hello all,
I've seen a lot of people experimenting with Decawave's DWM module, and I am using it myself for my PhD research. I have a custom expansion board; the schematic, layout and Crazyflie 2.0 firmware code are available at https://github.com/thecodemaiden/crazyflie-firmware.
My code currently reads the network ID (0xDECA0301) from the DWM's registers using SPI - no radio communication yet.
Here's a picture of the finished board.
Decawave DWM100 board + code available
Decawave DWM100 board + code available
- Attachments
-
Re: Decawave DWM100 board + code available
Great! Thanks for sharing.
Yes there seems to be a lot of people working around that chip, we are (even if I do not really get as much time as I would like to work on it).
I am getting some progres on the evaluation of the dwm1000 with a very similar board as the one you did. Though I need an open-source driver to be able to push on Github.
The arduino lib is quite advanced: https://github.com/thotro/arduino-dw1000 I am thinking of porting it to C.
Yes there seems to be a lot of people working around that chip, we are (even if I do not really get as much time as I would like to work on it).
I am getting some progres on the evaluation of the dwm1000 with a very similar board as the one you did. Though I need an open-source driver to be able to push on Github.
The arduino lib is quite advanced: https://github.com/thotro/arduino-dw1000 I am thinking of porting it to C.