After fw update to lastone after selftest is ok I can't control it
Red LED flashing one second period but it is not flying....
Please help!
Crazyflie died after firmware updatw
Re: Crazyflie died after firmware updatw
SYS: ----------------------------
SYS: Crazyflie 1.0 is up and running!
SYS: Build NA:NA (2016.02) CLEAN
SYS: I am 0x8725300848557250672FF51 and I have 128KB of flash!
CFGBLK: v0, verification [OK]
IMU: MPU6050 I2C connection [OK].
IMU: HMC5883 I2C connection [OK].
IMU: MS5611 I2C connection [OK].
MPU6050: Self test [OK].
HMC5883L: Self test [OK].
MS5611: Self test [OK].
SYS: The system resumed after watchdog timeout [WARNING]
SYS: No assert information found
SYS: Crazyflie 1.0 is up and running!
SYS: Build NA:NA (2016.02) CLEAN
SYS: I am 0x8725300848557250672FF51 and I have 128KB of flash!
CFGBLK: v0, verification [OK]
IMU: MPU6050 I2C connection [OK].
IMU: HMC5883 I2C connection [OK].
IMU: MS5611 I2C connection [OK].
MPU6050: Self test [OK].
HMC5883L: Self test [OK].
MS5611: Self test [OK].
SYS: The system resumed after watchdog timeout [WARNING]
SYS: No assert information found