[SOLVED]ARM-JTAG-20-10 vs ARM-USB-TINY-H for the AI deck

Discussions about the AI-deck
Post Reply
Posts: 12
Joined: Wed Jan 27, 2021 3:06 pm

[SOLVED]ARM-JTAG-20-10 vs ARM-USB-TINY-H for the AI deck

Post by Sadeem »


What is the difference between ARM-JTAG-20-10 and ARM-USB-TINY-H?
Also, what is the most necessary for the AI deck? And if so, how many for one AI deck?

Thank you.
Last edited by Sadeem on Tue Feb 02, 2021 4:36 pm, edited 1 time in total.
Posts: 748
Joined: Fri Jul 06, 2018 11:13 am

Re: ARM-JTAG-20-10 vs ARM-USB-TINY-H for the AI deck

Post by kimberly »

The ARM-JTAG-20-10 is a 20 pin to 10 pin adapter for the olimex, and ARM-USB-TINY-H is the programmer itself. Both is necessary to program the AIdeck, where you put the ARM-jtag-20-10 on the ARM-USB-TINY-H and connect the 10 pin lint cable (from the arm-jtag-20-10) to the deck. See the rest of the documentation here: https://github.com/bitcraze/AIdeck_exam ... ramming.md

You need one set of these for the AIdeck and same programmer+adapter set can be used for both the NINA and the GAP8 chip. Here is more documentation:
https://github.com/bitcraze/AIdeck_exam ... ramming.md
Post Reply