Bitcraze Forums

Hi,

This was indeed the solution!!! Thanks for the effort!!!

Best, Gerald

Ah ok, I will take a look at that! Thanks for the fast reply.

Hi,

I saw the trim settings in the flight tab, but those have a limit of 20 deg. If the 10 and 20 degrees are both entered, the CF is sort of flyable (i.e. when adding an extra 16 degrees of roll with the joystick). Tilting the CF also gives a correct output.

And yes, it came like this in the box.

Hi Arnaud,

Thanks for the advise.

Unfortunately it does not solve my problem yet, since I am only allowed to fill in a maximum of 10 degrees.
It did however do what I would expect (i.e. the roll offset was only 35 deg instead of 45 deg).

Do you have a way to circumvent this?

Thanks!!

Thanks for the reply. I think I have the same joystick. I did the manual calibration (starting with the xbox360 settings).

The problem is that the IMU gives an incorrect measurement when the CF lies flat on the table. I hope there is some way to calibrate the sensor.

Hi there, I am just starting off with my crazyflie. I am trying to fly it for the first time, using the virtualbox image (0.5) and the client software. But when I connect the crazyflie to the client, the calibration is incorrect (as can be seen in the figure, mainly the roll is off by much, when the...