re.schematic diagram for connecting flow deck

Firmware/software/electronics/mechanics
Post Reply
nkim324
Beginner
Posts: 2
Joined: Sat Apr 02, 2022 8:49 pm

re.schematic diagram for connecting flow deck

Post by nkim324 »

I am using OSATE to write some .aadl specifications for Crazyflie 2.0 for a school assignment.
One question asks me to add the flow deck extension and then add these into the .aadl files.
But in order to do so I need to know where the flow deck would fit into a schematic drawing thing that shows the flow deck, the nRF, STM, etc and all the buses connecting them.

I also want to model an end-to-end flow for the data originating in the deck flow to where it needs to go, I am guessing the STM.
tobias
Bitcraze
Posts: 2339
Joined: Mon Jan 28, 2013 7:17 pm
Location: Sweden

Re: re.schematic diagram for connecting flow deck

Post by tobias »

We don't really have what you are asking for but from the schematics this shouldn't be to hard to figure out. The Flow deck sensor connects to the STM, which you guessed right.
Post Reply