viewtopic.php?f=5&t=4416
During p2p communication, the message was interrupted when connecting to the client.
Code: Select all
---
SYS: Crazyflie 2.1 is up and running!
SYS: Build 59:f7b0222a3a17 (2020.06 +59) CLEAN
SYS: I am 0x20393743484850170035003F and I have 1024KB of flash!
CFGBLK: v1, verification [OK]
DECK_CORE: 0 deck(s) found
IMU: BMI088 Gyro I2C connection [OK].
IMU: BMI088 Accel I2C connection [OK]
IMU: BMP388 I2C connection [OK]
ESTIMATOR: Using Complementary (1) estimator
CONTROLLER: Using PID (1) controller
MTR-DRV: Using brushed motor driver
EEPROM: I2C connection [OK].
IMU: BMI088 gyro self-test [OK]
STAB: Wait for sensor calibration...
SYS: Free heap: 13224 bytes
Waiting for activation ...
[RSSI: -35 dBm] Message from CSTAB: Ready to fly.
[RSSI: -35 dBm] Message from C[RSSI: -35 dBm] Message from C[RSSI: -35 dBm] Message from C[RSSI: -35 dBm] Message from C[RSSI: -35 dBm] Message from C[RSSI: -35 dBm] Message from C[RSSI: -35 dBm] Message from C[RSSI: -35 dBm] Message from C[RSSI: -35 dBm] Message from C[RSSI: -35 dBm] Message from C[RSSI: -35 dBm] Message from C[RSSI: -35 dBm] Message from C[RSSI: -35 dBm] Message from C
...
But you said the problem was due to a lot of radio work, so where should I modify the radio communication call cycle to solve this?