Cannot fit three boards

Post here to get support
Post Reply
r0b0tn1k
Beginner
Posts: 1
Joined: Fri Aug 30, 2019 9:53 pm

Cannot fit three boards

Post by r0b0tn1k » Sat Aug 31, 2019 11:57 am

Hey guys!
I tried setting up the ranger deck, but it seems there's no space vertically?
I am looking at the setup guides, and I'm using the long pins, but there's just no room, the deck barely sticks on one side in the pins.
I'm using this setup: Image, but there's no room.

Photos:
Image
Image
Image

Please help a brother out.



Lombazombie
Beginner
Posts: 27
Joined: Sun Mar 25, 2018 12:37 am

Re: Cannot fit three boards

Post by Lombazombie » Fri Sep 20, 2019 9:19 pm

Hey r0b0tn1k,

Is there a deck on the bottom? It looks like its being stopped from going all the way up.

We actually ran into this issue as well since we had a custom deck that was a bit bigger. What we had to end up doing was removing that black part from the pins and individually pushing them through. I can probably post pictures later tomorrow or Monday.

Thanks.

Post Reply