Page 1 of 1
add more anchors, more group
Posted: Mon Jul 10, 2017 5:19 am
by justinleeyang
hi, all:
about tdoa mode, the current anchor address 1~7, named as group 1, if we have two zone nearly, add anchor 8~F, named as group2,
group1 maybe affect the 2, how to avoid the interfere? if more groups, how to do ?
Re: add more anchors, more group
Posted: Mon Jul 10, 2017 11:42 am
by arnaud
Hi,
If you want to have nearby system working independently you need to have them on different channel and/or preamble settings.
Re: add more anchors, more group
Posted: Mon Jul 10, 2017 2:36 pm
by justinleeyang
hi, arnaud:
if crazyflie2 must receive the two groups ? different channel and /or preamble settings only receive a group.
crazyflie2 try swith to different settings? or other.
Re: add more anchors, more group
Posted: Tue Jul 11, 2017 8:43 am
by arnaud
If you are in TWR, Crazyflie can switch channel and preamble when talking to the anchor, this would be one good way to improve the TDMA performances. If in TDoA mode though it is much mode difficult since you can only listen to one preamble/channel at one time.