Page 1 of 1
Debug connector to Crazyflie 2.0
Posted: Thu Jan 15, 2015 11:33 am
by massmog
Dear all,
I was wondering what kind of connector is the JTAG connector on the crazyflie pcb?
Thank you for your support!
Max
Re: Debug connector to Crazyflie 2.0
Posted: Mon Jan 19, 2015 7:56 pm
by chad
The connector on the Crazyflie supports the
Bitcraze Debug adapter (
available here) which has a few connectors on it (20-Pin ARM JTAG included). The debug adapter connection lets you debug the nRF51 and STM32 through the connector on the Crazyflie.
Re: Debug connector to Crazyflie 2.0
Posted: Thu Jan 22, 2015 2:35 pm
by massmog
Hey Chad,
thanks for answering, but what I was referring to was the connector below the usb port on the crazyflie 2.0 (
http://www.bitcraze.se/wp-content/galle ... 2_back.jpg). This seems to be some kind of molex connector of unknown size and type. Does anyone know what kind of connector this is? I was aware of the fact that this is the debug, since I want to connect this port to my ARM jtag adapter w/o the debug adapter (which I do not need)
Kind regards to CA,
Max
Re: Debug connector to Crazyflie 2.0
Posted: Fri Jan 23, 2015 9:48 am
by tobias
It is a JST connector: SM06B-SRSS-TB
Re: Debug connector to Crazyflie 2.0
Posted: Fri Jan 23, 2015 7:08 pm
by chad
Thanks Tobias! I added it to the
spare components list.
