My insaneflie build
My insaneflie build
I recently bought one of the original crazyflie, I bought it with the intention of making it into an indoor racer. I plan on changing out the 6mm motor with more powerful 7mm and from reading this (viewtopic.php?t=871) it should be able to handle them. Another upgrade is the whole thing is going into rakon nano qx frame since looking at the motor motor gets me worried about snapping them off on a crash and of course I plan on upgrading the battery.
Re: My insaneflie build
That looks really nice! Will be very interesting to follow your progress (and help you out in case of any issues)!
Re: My insaneflie build
Motor are on the way and they are CL0720-14 motor expecting around 26 gram max thrust from each motor with a Hubsan X4 propeller and a auw of around 30 gram it should be a pretty speedy indoor quad.
Re: My insaneflie build
Update time, I was not happy with the rubber band mount and after some failure and several prototype my adapter plate finally came out good. This plate will perfectly mount the crazyflie to the rakon nano qx frame.
This is the end result
I will probably get it cut in a little less thick material but for a prototype it's not bad.
This is how it started
Then it was modified to this
Then to this
This followed
And other followed until I got the one in the first photo.
This was my diy jig to test hole fitment to the crazyflie
And this is the hole jig for the frame just some paperclips
Programs used in the design process are rhino and solidworks
This is the end result
I will probably get it cut in a little less thick material but for a prototype it's not bad.
This is how it started
Then it was modified to this
Then to this
This followed
And other followed until I got the one in the first photo.
This was my diy jig to test hole fitment to the crazyflie
And this is the hole jig for the frame just some paperclips
Programs used in the design process are rhino and solidworks
Re: My insaneflie build
Keep going! I love watching this process!!
Crazyflier - my CF journal...
4x Crazyflie Nano (1.0) 10-DOF + NeoPixel Ring mod.
3x Crazyflie 2.0 + Qi Charger and LED Decks.
Raspberry Pi Ground Control.
Mac OS X Dev Environment.
Walkera Devo7e, ESky ET6I, PS3 and iOS Controllers.
4x Crazyflie Nano (1.0) 10-DOF + NeoPixel Ring mod.
3x Crazyflie 2.0 + Qi Charger and LED Decks.
Raspberry Pi Ground Control.
Mac OS X Dev Environment.
Walkera Devo7e, ESky ET6I, PS3 and iOS Controllers.
Re: My insaneflie build
Yes they do if they are put in special way. There is a thread about it with some photos.