[SOLVED]debug://0/0 - Debugdriver for UI testing

Post here to get support
Post Reply
baicker
Beginner
Posts: 20
Joined: Tue Dec 31, 2013 5:24 am

[SOLVED]debug://0/0 - Debugdriver for UI testing

Post by baicker »

I have seen the "debug://0/0 - Debugdriver for UI testing" only one time in the client, (i can't remember when and how)

but now, when i pluging the crazyradio and pressing the scan button, i can see nothing,
is it something wrong with the crazyradio or other problems ?

(the crazyradio can be recognized by the system in VM )
Last edited by baicker on Thu Jan 16, 2014 2:05 pm, edited 1 time in total.
arnaud
Bitcraze
Posts: 2538
Joined: Tue Feb 06, 2007 12:36 pm

Re: debug://0/0 - Debugdriver for UI testing

Post by arnaud »

The debug driver has been removed by default to limit confusion. It is only intended to test the client software, if you want it back you can re-enable it by manually editing the config.json file.

Do you see that the radio is found in help/about/debug?
baicker
Beginner
Posts: 20
Joined: Tue Dec 31, 2013 5:24 am

Re: debug://0/0 - Debugdriver for UI testing

Post by baicker »

arnaud wrote:The debug driver has been removed by default to limit confusion. It is only intended to test the client software, if you want it back you can re-enable it by manually editing the config.json file.

Do you see that the radio is found in help/about/debug?
Is the serial:None right?

Cfclient
Cfclient version: 2013.11-beta1
System: linux2

Interface status
serial: None
radio: Crazyradio version 0.52
udp: None

Crazyflie
Connected: None
Firmware: None
Sensors found
Sensors tests
tobias
Bitcraze
Posts: 2339
Joined: Mon Jan 28, 2013 7:17 pm
Location: Sweden

Re: debug://0/0 - Debugdriver for UI testing

Post by tobias »

Is the Crazyflie running as it should? The Crazyradio seam to be working. When you press connect button does the red LED on the Crazyradio blink?
baicker
Beginner
Posts: 20
Joined: Tue Dec 31, 2013 5:24 am

Re: debug://0/0 - Debugdriver for UI testing

Post by baicker »

tobias wrote:Is the Crazyflie running as it should? The Crazyradio seam to be working. When you press connect button does the red LED on the Crazyradio blink?
i solved all the problems, i understand finally, i have flashed the cflie.bin without the crazyflie bootloader by jtag

thank you tobias, thank you arnaud.
Post Reply