Only M2 light was on

Discussions and questions about the Crazyradio
Post Reply
Barry
Beginner
Posts: 28
Joined: Tue Apr 06, 2021 9:19 am

Only M2 light was on

Post by Barry »

Dear all,

I am using crazyflie bolt. After I connected the ESC -> ESC connector -> crazyflie bolt then I powered the crazyflie bolt with a 12v battery.

I measured the voltage from ESC, but accidentally I short the ESC module and then the lights of crazyflie bolt are all turned off.

After I push the button on the crazyflie bolt agaion. It only showed the M2 led light. As I shown below:
1.png

Also, the STM32 chip turned super hot when I give the power to the crazyflie bolt.

Could anyone help me to recovery it. Thank you so much.

Cheers!
Attachments
1.png
1.png (119.52 KiB) Viewed 35128 times
tobias
Bitcraze
Posts: 2339
Joined: Mon Jan 28, 2013 7:17 pm
Location: Sweden

Re: Only M2 light was on

Post by tobias »

Sorry to hear that but if the STM32 gets super hot there is a big chance it got burnt. With the right tools and skills it can be replaced.
ellapurnellrt
Beginner
Posts: 1
Joined: Tue Apr 12, 2022 8:20 am

Re: Only M2 light was on

Post by ellapurnellrt »

tobias wrote: Mon Aug 30, 2021 2:46 pm Sorry to hear that but if the STM32 gets super hot there is a big chance it got burnt. With the right tools and skills it can be replaced.retro bowl unblocked
OH Thanks very much
Post Reply