Dear all,
I am using crazyflie bolt. After I connected the ESC -> ESC connector -> crazyflie bolt then I powered the crazyflie bolt with a 12v battery.
I measured the voltage from ESC, but accidentally I short the ESC module and then the lights of crazyflie bolt are all turned off.
After I push the button on the crazyflie bolt agaion. It only showed the M2 led light. As I shown below:
1.png
Also, the STM32 chip turned super hot when I give the power to the crazyflie bolt.
Could anyone help me to recovery it. Thank you so much.
Cheers!
Only M2 light was on
Only M2 light was on
- Attachments
-
- 1.png (119.52 KiB) Viewed 47144 times
Re: Only M2 light was on
Sorry to hear that but if the STM32 gets super hot there is a big chance it got burnt. With the right tools and skills it can be replaced.
-
ellapurnellrt
- Beginner
- Posts: 1
- Joined: Tue Apr 12, 2022 8:20 am
Re: Only M2 light was on
OH Thanks very muchtobias wrote: ↑Mon Aug 30, 2021 2:46 pm Sorry to hear that but if the STM32 gets super hot there is a big chance it got burnt. With the right tools and skills it can be replaced.retro bowl unblocked