remove imu, only uwb, tdoa position

All discussions related to the Loco Positioning system
Post Reply
justinleeyang
Expert
Posts: 186
Joined: Mon Dec 28, 2015 5:07 am

remove imu, only uwb, tdoa position

Post by justinleeyang »

hi, arnaud:

if disable imu, only uwb, can we get the right and stable position ?
arnaud
Bitcraze
Posts: 2538
Joined: Tue Feb 06, 2007 12:36 pm

Re: remove imu, only uwb, tdoa position

Post by arnaud »

Maybe, it depends of what is your expectation of 'stable'. In theory the absolute position quality should be the same, but the dynamic performance should be worse since the IMU is used for short-term movement.

If you test I am interested to hear about the result ;-).
justinleeyang
Expert
Posts: 186
Joined: Mon Dec 28, 2015 5:07 am

Re: remove imu, only uwb, tdoa position

Post by justinleeyang »

hi,

ok, I will try, and can 4 anchors get the tag's 2D position, no need z axis ?
arnaud
Bitcraze
Posts: 2538
Joined: Tue Feb 06, 2007 12:36 pm

Re: remove imu, only uwb, tdoa position

Post by arnaud »

This can be done by feeding a fixed (roughly accurate) Z position input to the kalman filter. For an example of how to feed Z position you can look at the z-ranger deck driver.
justinleeyang
Expert
Posts: 186
Joined: Mon Dec 28, 2015 5:07 am

Re: remove imu, only uwb, tdoa position

Post by justinleeyang »

with hyperbolic method, I have geted the tag's position, thanks.
and I also try your method
Post Reply