Hi everybody,
I'm Anastasia from University of L'Aquila. I'm dealing with a project on crazyflie 2.0 and I have to mount the propellers B2 and A1 type on the crazyflie.
I would like to know how to mount them, I mean what their configuration on the crazyflie should be?
Bye everyone,
Anastasia
How to mount propellers A1 and B2 on crazyflie 2.0
Re: How to mount propellers A1 and B2 on crazyflie 2.0
Hi,
This is documented in the Getting started documentation: https://www.bitcraze.io/getting-started ... infostep15
There is two types of propeller, conter clockwise and clockwise, the rotation direction is indicated on the Crazyflie PCB. Visually you can find which propeller will product thrust upwards when rotated with the convex part on the top.
This is documented in the Getting started documentation: https://www.bitcraze.io/getting-started ... infostep15
There is two types of propeller, conter clockwise and clockwise, the rotation direction is indicated on the Crazyflie PCB. Visually you can find which propeller will product thrust upwards when rotated with the convex part on the top.