How to determine CF Radio for effective working status?

Firmware/software/electronics
Post Reply
gl516
Member
Posts: 35
Joined: Thu May 30, 2013 1:43 am

How to determine CF Radio for effective working status?

Post by gl516 »

Everybody is good, can help to solve, I unable to connect to the CF radio wirelessly bootload (unable to load)
!
tobias
Bitcraze
Posts: 2339
Joined: Mon Jan 28, 2013 7:17 pm
Location: Sweden

Re: How to determine CF Radio for effective working status?

Post by tobias »

I'm not sure what you mean, can you try to clarify?
gl516
Member
Posts: 35
Joined: Thu May 30, 2013 1:43 am

Re: How to determine CF Radio for effective working status?

Post by gl516 »

I mean I can't connected to the CF by USB Debuger... But now I don't know is usb debuger not send signal or CF not received signal ? So I ask you how to test them? tks!
marcus
Bitcraze
Posts: 659
Joined: Mon Jan 28, 2013 7:02 pm
Location: Sweden
Contact:

Re: How to determine CF Radio for effective working status?

Post by marcus »

There are some instructions on how to bootload using the Crazyradio on our wiki. Are you not able to connect to the Crazyflie during the bootloading?
gl516
Member
Posts: 35
Joined: Thu May 30, 2013 1:43 am

Re: How to determine CF Radio for effective working status?

Post by gl516 »

goodnews ! I try to use "cloader.hex" programming to a my CF, then via USB discovered what.. The diagram below. but I still can't wireless upgrade my CF.
USB Donger try to connecting CF
USB Donger try to connecting CF
what's this ? .......radio://0/122/2M ????
tobias
Bitcraze
Posts: 2339
Joined: Mon Jan 28, 2013 7:17 pm
Location: Sweden

Re: How to determine CF Radio for effective working status?

Post by tobias »

It means it found the Crazyflie on channel 122 and 2Mbit datarate. Can you connect to you Crazyflie?
gl516
Member
Posts: 35
Joined: Thu May 30, 2013 1:43 am

Re: How to determine CF Radio for effective working status?

Post by gl516 »

tobias wrote:It means it found the Crazyflie on channel 122 and 2Mbit datarate. Can you connect to you Crazyflie?
==============================
yes...... it can connecting CF by easy Connect mode on the Client (CF has download cloader.hex, the system running ok..... ), but not connecting boot mode ......i feel "radio://0/122/2M " is't a valid radio ...... pls help me !!!
arnaud
Bitcraze
Posts: 2538
Joined: Tue Feb 06, 2007 12:36 pm

Re: How to determine CF Radio for effective working status?

Post by arnaud »

Hi, The 122 is a channel that can work.
If you want to flash something with the bootloader you have to flash one of the released firmware: https://bitbucket.org/bitcraze/crazyfli ... /downloads or one that you built.
Post Reply