Page 2 of 2

Re: Can't burn firmware into Crazyflie 2.0

Posted: Wed Jun 02, 2021 5:33 pm
by jonasdn
Hi jacobgk2!

I am glad to hear that the most urgent issue was solved! For the cold boot, perhaps you could help us to understand what's going on by running the following command:

Code: Select all

$ python3 -m cfloader flash /path/to/firmware-file stm32-fw
You can get a firmware file from here: https://github.com/bitcraze/crazyflie-f ... ag/2021.03 (cf2.2021.03.bin)

Thanks!

Re: Can't burn firmware into Crazyflie 2.0

Posted: Tue Jun 08, 2021 4:40 pm
by jacobgk2
Hi again jonasdn!

After downloading the cf2-2021.03.bin file, I ran the provided command in a command prompt and a "No module named cfloader" error was thrown. I ran the following command to make sure cfloader had been installed:

Code: Select all

pip3 install cfloader
and I got a "Requirement already satisfied" response. Do you know what the issue might be here?

As always, thank you for all of your help!

Re: Can't burn firmware into Crazyflie 2.0

Posted: Tue Jun 08, 2021 4:48 pm
by jacobgk2
UPDATE: I'm not sure what changed but going back into the Crazyflie PC client and back into the cold boot (recovery) menu, I was able to connect to and flash the latest firmware release to my Crazyflie. That being said all of my issues pertaining to flashing have been resolved!