Yes, I do. It's included in this text:
Code: Select all
bitcraze@bitcraze-ubuntu:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.0-25-generic (buildd@lamiak) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #39-Ubuntu SMP Mon Feb 25 19:02:34 UTC 2013 (Ubuntu 3.5.0-25.39-generic 3.5.7.4)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7fff0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR variable ranges disabled:
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] CPU MTRRs all blank - virtualized system.
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[ 0.000000] [mem 0x00000000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x379fffff] page 2M
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
[ 0.000000] RAMDISK: [mem 0x3632a000-0x3718cfff]
[ 0.000000] ACPI: RSDP 000e0000 00024 (v02 VBOX )
[ 0.000000] ACPI: XSDT 7fff0030 00034 (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
[ 0.000000] ACPI: FACP 7fff00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
[ 0.000000] ACPI: DSDT 7fff0410 01B96 (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
[ 0.000000] ACPI: FACS 7fff0200 00040
[ 0.000000] ACPI: SSDT 7fff0240 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
[ 0.000000] 1155MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x7ffeffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7ffeffff]
[ 0.000000] On node 0 totalpages: 524159
[ 0.000000] free_area_init_node: node 0, pgdat c18a4940, node_mem_map f532a200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2312 pages used for memmap
[ 0.000000] HighMem zone: 293610 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Found and enabled local APIC!
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] e820: [mem 0x80000000-0xfffbffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7be3000 s34176 r0 d23168 u57344
[ 0.000000] pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-25-generic root=UUID=115869d1-90a9-4612-952d-23fc768735a2 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4194048 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0007fff0)
[ 0.000000] Memory: 2049892k/2097088k available (5967k kernel code, 46744k reserved, 2934k data, 756k init, 1183688k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc18b2000 - 0xc196f000 ( 756 kB)
[ 0.000000] .data : 0xc15d3de4 - 0xc18b1800 (2934 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15d3de4 (5967 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f4c08000 soft=f4c0a000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
[ 0.000000] Detected 2077.616 MHz processor.
[ 0.008002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4155.23 BogoMIPS (lpj=8310464)
[ 0.008005] pid_max: default: 32768 minimum: 301
[ 0.008033] Security Framework initialized
[ 0.008050] AppArmor: AppArmor initialized
[ 0.008051] Yama: becoming mindful.
[ 0.008095] Mount-cache hash table entries: 512
[ 0.008285] Initializing cgroup subsys cpuacct
[ 0.008288] Initializing cgroup subsys memory
[ 0.008297] Initializing cgroup subsys devices
[ 0.008298] Initializing cgroup subsys freezer
[ 0.008300] Initializing cgroup subsys blkio
[ 0.008302] Initializing cgroup subsys perf_event
[ 0.008539] mce: CPU supports 0 MCE banks
[ 0.008661] using mwait in idle threads.
[ 0.011946] SMP alternatives: switching to UP code
[ 0.075079] Freeing SMP alternatives: 24k freed
[ 0.075090] ACPI: Core revision 20120320
[ 0.075954] ACPI: setting ELCR to 0200 (from 0e20)
[ 0.076067] ftrace: allocating 24614 entries in 49 pages
[ 0.084523] weird, boot CPU (#0) not listed by the BIOS.
[ 0.084560] SMP motherboard not detected.
[ 0.084581] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.088004] SMP disabled
[ 0.088004] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
[ 0.088004] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.088004] Brought up 1 CPUs
[ 0.088004] Total of 1 processors activated (4155.23 BogoMIPS).
[ 0.088004] devtmpfs: initialized
[ 0.088004] EVM: security.selinux
[ 0.088004] EVM: security.SMACK64
[ 0.088004] EVM: security.capability
[ 0.088004] dummy:
[ 0.088004] RTC time: 19:34:24, date: 05/05/13
[ 0.088004] NET: Registered protocol family 16
[ 0.088004] EISA bus registered
[ 0.088004] ACPI: bus type pci registered
[ 0.088004] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.088004] PCI: PCI BIOS revision 2.10 entry at 0xfda26, last bus=0
[ 0.088004] PCI: Using configuration type 1 for base access
[ 0.088004] bio: create slab <bio-0> at 0
[ 0.088004] ACPI: Added _OSI(Module Device)
[ 0.088004] ACPI: Added _OSI(Processor Device)
[ 0.088004] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.088004] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.088123] ACPI: EC: Look up EC in DSDT
[ 0.088426] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.091336] ACPI: Interpreter enabled
[ 0.091349] ACPI: (supports S0 S5)
[ 0.091361] ACPI: Using PIC for interrupt routing
[ 0.093447] ACPI: No dock devices found.
[ 0.093454] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.093517] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.093614] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.093616] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.093619] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.093621] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffdfffff] (ignored)
[ 0.093622] PCI: root bus 00: using default resources
[ 0.093667] PCI host bridge to bus 0000:00
[ 0.093670] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.093673] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.093737] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.094312] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.095173] pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
[ 0.095784] pci 0000:00:01.1: reg 20: [io 0xd000-0xd00f]
[ 0.096317] pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
[ 0.098163] pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe0ffffff pref]
[ 0.108754] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 0.110195] pci 0000:00:03.0: reg 10: [mem 0xf0000000-0xf001ffff]
[ 0.112413] pci 0000:00:03.0: reg 18: [io 0xd010-0xd017]
[ 0.118807] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
[ 0.120214] pci 0000:00:04.0: reg 10: [io 0xd020-0xd03f]
[ 0.121549] pci 0000:00:04.0: reg 14: [mem 0xf0400000-0xf07fffff]
[ 0.122900] pci 0000:00:04.0: reg 18: [mem 0xf0800000-0xf0803fff pref]
[ 0.128409] pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
[ 0.129794] pci 0000:00:06.0: reg 10: [mem 0xf0804000-0xf0804fff]
[ 0.137652] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
[ 0.138884] pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
[ 0.140238] pci 0000:00:0d.0: reg 10: [io 0xd040-0xd047]
[ 0.142935] pci 0000:00:0d.0: reg 18: [io 0xd050-0xd057]
[ 0.145539] pci 0000:00:0d.0: reg 20: [io 0xd060-0xd06f]
[ 0.146887] pci 0000:00:0d.0: reg 24: [mem 0xf0806000-0xf0807fff]
[ 0.149469] pci_bus 0000:00: on NUMA node 0
[ 0.149538] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.150601] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.154843] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
[ 0.155132] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
[ 0.155226] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
[ 0.155319] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
[ 0.155552] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.155556] vgaarb: loaded
[ 0.155558] vgaarb: bridge control possible 0000:00:02.0
[ 0.155833] SCSI subsystem initialized
[ 0.155913] libata version 3.00 loaded.
[ 0.155965] ACPI: bus type usb registered
[ 0.156009] usbcore: registered new interface driver usbfs
[ 0.156009] usbcore: registered new interface driver hub
[ 0.156009] usbcore: registered new device driver usb
[ 0.156009] PCI: Using ACPI for IRQ routing
[ 0.156009] PCI: pci_cache_line_size set to 64 bytes
[ 0.156124] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.156134] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
[ 0.156262] NetLabel: Initializing
[ 0.156264] NetLabel: domain hash size = 128
[ 0.156265] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.156274] NetLabel: unlabeled traffic allowed by default
[ 0.164009] AppArmor: AppArmor Filesystem Enabled
[ 0.164009] pnp: PnP ACPI init
[ 0.164009] ACPI: bus type pnp registered
[ 0.164125] pnp 00:00: [bus 00-ff]
[ 0.164146] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.164166] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.164184] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.164202] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.164219] pnp 00:00: [mem 0x80000000-0xffdfffff window]
[ 0.164267] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.164302] pnp 00:01: [io 0x0060]
[ 0.164318] pnp 00:01: [io 0x0064]
[ 0.164335] pnp 00:01: [irq 1]
[ 0.164370] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.164402] pnp 00:02: [io 0x0000-0x000f]
[ 0.164416] pnp 00:02: [io 0x0080-0x008f]
[ 0.164429] pnp 00:02: [io 0x00c0-0x00df]
[ 0.164443] pnp 00:02: [dma 4]
[ 0.164474] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.164547] pnp 00:03: [irq 12]
[ 0.164581] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 (active)
[ 0.164606] pnp 00:04: [io 0x0378-0x037f]
[ 0.164618] pnp 00:04: [io 0x0778-0x077f]
[ 0.164629] pnp 00:04: [irq 7]
[ 0.164658] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.165391] pnp: PnP ACPI: found 5 devices
[ 0.165393] ACPI: ACPI bus type pnp unregistered
[ 0.165396] PnPBIOS: Disabled by ACPI PNP
[ 0.202283] Switching to clocksource acpi_pm
[ 0.202315] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.202318] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.202363] NET: Registered protocol family 2
[ 0.202438] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.202633] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.204012] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.204012] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.204012] TCP: reno registered
[ 0.204012] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.204012] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.204012] NET: Registered protocol family 1
[ 0.204012] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.204012] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.204012] pci 0000:00:02.0: Boot video device
[ 0.204012] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.204012] PCI: setting IRQ 11 as level-triggered
[ 0.204012] PCI: CLS 0 bytes, default 64
[ 0.204012] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.204012] audit: initializing netlink socket (disabled)
[ 0.204012] type=2000 audit(1367782464.200:1): initialized
[ 0.226243] Trying to unpack rootfs image as initramfs...
[ 0.253335] highmem bounce pool size: 64 pages
[ 0.253353] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.264540] VFS: Disk quotas dquot_6.5.2
[ 0.264610] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.265367] fuse init (API version 7.19)
[ 0.265500] msgmni has been set to 1691
[ 0.284043] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.284044] io scheduler noop registered
[ 0.284044] io scheduler deadline registered (default)
[ 0.284044] io scheduler cfq registered
[ 0.284044] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.284062] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.284263] ACPI: AC Adapter [AC] (on-line)
[ 0.284325] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.284329] ACPI: Power Button [PWRF]
[ 0.284411] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 0.284414] ACPI: Sleep Button [SLPF]
[ 0.286507] ACPI: Battery Slot [BAT0] (battery present)
[ 0.286642] GHES: HEST is not enabled!
[ 0.286705] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.290227] ACPI: Battery Slot [BAT0] (battery present)
[ 0.290246] isapnp: Scanning for PnP cards...
[ 0.296238] Linux agpgart interface v0.103
[ 0.297560] brd: module loaded
[ 0.298202] loop: module loaded
[ 0.298328] ahci 0000:00:0d.0: version 3.0
[ 0.299089] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
[ 0.299092] PCI: setting IRQ 5 as level-triggered
[ 0.299263] ahci: SSS flag set, parallel bus scan disabled
[ 0.299562] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 0.299565] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
[ 0.299596] ahci 0000:00:0d.0: setting latency timer to 64
[ 0.351155] scsi0 : ahci
[ 0.351226] ata1: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 5
[ 0.351277] ata_piix 0000:00:01.1: version 2.13
[ 0.351402] ata_piix 0000:00:01.1: setting latency timer to 64
[ 0.351709] scsi1 : ata_piix
[ 0.351930] scsi2 : ata_piix
[ 0.351973] ata2: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 0.351975] ata3: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 0.352035] Fixed MDIO Bus: probed
[ 0.353054] tun: Universal TUN/TAP device driver, 1.6
[ 0.353061] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.353125] PPP generic driver version 2.4.2
[ 0.353185] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.353215] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.353312] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 0.353330] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 0.353337] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 1
[ 0.353381] ohci_hcd 0000:00:06.0: irq 11, io mem 0xf0804000
[ 0.442774] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.442779] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.442781] usb usb1: Product: OHCI Host Controller
[ 0.442783] usb usb1: Manufacturer: Linux 3.5.0-25-generic ohci_hcd
[ 0.442785] usb usb1: SerialNumber: 0000:00:06.0
[ 0.508682] ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 0.509239] ata3.00: configured for UDMA/33
[ 0.520173] hub 1-0:1.0: USB hub found
[ 0.520199] hub 1-0:1.0: 8 ports detected
[ 0.520636] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.520705] usbcore: registered new interface driver libusual
[ 0.520740] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.304347] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.304476] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 1.304479] ata1.00: 20971520 sectors, multi 128: LBA48 NCQ (depth 31/32)
[ 1.304635] ata1.00: configured for UDMA/133
[ 1.398338] isapnp: No Plug & Play device found
[ 1.398457] scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
[ 1.398605] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.398675] sd 0:0:0:0: [sda] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
[ 1.398713] sd 0:0:0:0: [sda] Write Protect is off
[ 1.398716] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.398732] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.427557] sda: sda1 sda2 < sda5 >
[ 1.428494] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.428915] scsi 2:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
[ 1.430662] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
[ 1.430665] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.430758] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.430967] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.538367] Freeing initrd memory: 14732k freed
[ 1.540907] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.540918] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.541055] mousedev: PS/2 mouse device common for all mice
[ 1.541620] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.542275] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.542335] rtc0: alarms up to one day, 114 bytes nvram
[ 1.542391] device-mapper: uevent: version 1.0.3
[ 1.542449] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.542482] EISA: Probing bus 0 at eisa.0
[ 1.542530] Cannot allocate resource for EISA slot 4
[ 1.542574] EISA: Detected 0 cards.
[ 1.542587] cpuidle: using governor ladder
[ 1.542589] cpuidle: using governor menu
[ 1.542590] EFI Variables Facility v0.08 2004-May-17
[ 1.542767] ashmem: initialized
[ 1.542898] TCP: cubic registered
[ 1.542998] NET: Registered protocol family 10
[ 1.543205] NET: Registered protocol family 17
[ 1.543215] Key type dns_resolver registered
[ 1.543282] Using IPI No-Shortcut mode
[ 1.543358] PM: Hibernation image not present or could not be loaded.
[ 1.543368] registered taskstats version 1
[ 1.546749] Key type trusted registered
[ 1.549689] Key type encrypted registered
[ 1.552767] Magic number: 13:413:596
[ 1.552905] rtc_cmos rtc_cmos: setting system clock to 2013-05-05 19:34:25 UTC (1367782465)
[ 1.552963] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.552964] EDD information not available.
[ 1.553087] Freeing unused kernel memory: 756k freed
[ 1.553333] Write protecting the kernel text: 5968k
[ 1.553354] Write protecting the kernel read-only data: 2428k
[ 1.553355] NX-protecting the kernel data: 4272k
[ 1.557058] usb 1-1: new full-speed USB device number 2 using ohci_hcd
[ 1.582512] udevd[90]: starting version 175
[ 1.754337] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.754341] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.754764] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 1.754766] PCI: setting IRQ 10 as level-triggered
[ 1.754816] e1000 0000:00:03.0: setting latency timer to 64
[ 2.228193] Refined TSC clocksource calibration: 2077.581 MHz.
[ 2.228199] Switching to clocksource tsc
[ 2.295072] e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 08:00:27:a4:c2:bf
[ 2.295080] e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.322050] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 2.322054] EXT4-fs (sda1): write access will be enabled during recovery
[ 2.329787] usb 1-1: New USB device found, idVendor=80ee, idProduct=0021
[ 2.329791] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.329793] usb 1-1: Product: USB Tablet
[ 2.329795] usb 1-1: Manufacturer: VirtualBox
[ 2.348319] usbcore: registered new interface driver usbhid
[ 2.348323] usbhid: USB HID core driver
[ 2.371386] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input3
[ 2.372440] hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
[ 2.485349] EXT4-fs (sda1): recovery complete
[ 2.487442] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.744317] usb 1-2: new full-speed USB device number 3 using ohci_hcd
[ 3.212775] usb 1-2: New USB device found, idVendor=0489, idProduct=e031
[ 3.212785] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.212792] usb 1-2: Product: BCM20702A0
[ 3.212797] usb 1-2: Manufacturer: Broadcom Corp
[ 3.212802] usb 1-2: SerialNumber: 90004E9C5332
[ 3.613048] usb 1-3: new full-speed USB device number 4 using ohci_hcd
[ 4.082873] usb 1-3: New USB device found, idVendor=1915, idProduct=7777
[ 4.082882] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=29
[ 4.082887] usb 1-3: Product: Crazyradio USB Dongle
[ 4.082891] usb 1-3: Manufacturer: Bitcraze
[ 4.082895] usb 1-3: SerialNumber: 1CAA81DDDE
[ 13.168264] Adding 522236k swap on /dev/sda5. Priority:-1 extents:1 across:522236k
[ 13.204805] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.256251] udevd[295]: starting version 175
[ 13.318981] lp: driver loaded but no devices found
[ 13.421511] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 13.490253] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[ 13.490257] PCI: setting IRQ 9 as level-triggered
[ 13.550278] input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input4
[ 13.685913] init: Failed to spawn bluetooth main process: unable to execute: Permission denied
[ 13.825569] vboxguest: major 0, IRQ 9, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
[ 13.825573] vboxguest: Successfully loaded version 4.2.8 (interface 0x00010004)
[ 13.826837] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 13.875863] Bluetooth: Core ver 2.16
[ 13.875887] NET: Registered protocol family 31
[ 13.875888] Bluetooth: HCI device and connection manager initialized
[ 13.875890] Bluetooth: HCI socket layer initialized
[ 13.875892] Bluetooth: L2CAP socket layer initialized
[ 13.875895] Bluetooth: SCO socket layer initialized
[ 13.883014] ppdev: user-space parallel port driver
[ 13.885632] parport_pc 00:04: reported by Plug and Play ACPI
[ 13.902085] Bluetooth: RFCOMM TTY layer initialized
[ 13.902091] Bluetooth: RFCOMM socket layer initialized
[ 13.902093] Bluetooth: RFCOMM ver 1.11
[ 13.922642] type=1400 audit(1367782477.866:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=539 comm="apparmor_parser"
[ 13.926527] type=1400 audit(1367782477.870:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=539 comm="apparmor_parser"
[ 13.954571] type=1400 audit(1367782477.898:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=548 comm="apparmor_parser"
[ 13.958523] type=1400 audit(1367782477.902:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=548 comm="apparmor_parser"
[ 13.958765] type=1400 audit(1367782477.902:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=548 comm="apparmor_parser"
[ 13.993218] usbcore: registered new interface driver btusb
[ 14.122513] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[ 14.128393] microcode: CPU0 sig=0x206a7, pf=0x1, revision=0x0
[ 14.432949] init: failsafe main process (612) killed by TERM signal
[ 14.625344] type=1400 audit(1367782478.570:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=732 comm="apparmor_parser"
[ 14.625743] type=1400 audit(1367782478.570:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=732 comm="apparmor_parser"
[ 14.636475] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 14.643001] Bluetooth: can't load firmware, may not work correctly
[ 14.646348] type=1400 audit(1367782478.590:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=737 comm="apparmor_parser"
[ 14.654013] type=1400 audit(1367782478.598:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=737 comm="apparmor_parser"
[ 14.654257] type=1400 audit(1367782478.598:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=737 comm="apparmor_parser"
[ 14.673737] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 14.673740] vesafb: scrolling: redraw
[ 14.673743] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 14.673756] mtrr: your processor doesn't support write-combining
[ 14.673810] vesafb: framebuffer at 0xe0000000, mapped to 0xf9f00000, using 1216k, total 1216k
[ 14.673915] Console: switching to colour frame buffer device 80x30
[ 14.673929] fb0: VESA VGA frame buffer device
[ 14.765565] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 14.792447] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.794389] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.498281] init: alsa-restore main process (830) terminated with status 19
[ 15.736175] vboxsf: Successfully loaded version 4.2.8 (interface 0x00010004)
[ 15.749190] [drm] Initialized drm 1.1.0 20060810
[ 15.751809] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 15.751819] [drm] No driver support for vblank timestamp query.
[ 15.751829] [drm] Initialized vboxvideo 1.0.0 20090303 for 0000:00:02.0 on minor 0
[ 16.109698] init: plymouth-upstart-bridge main process (470) killed by TERM signal
[ 16.534147] init: plymouth-stop pre-start process (1233) terminated with status 1
