Hi Guys,
I just bought two crazyflies and tried to fly using the BitcrazeVM, in Ubuntu, and a game pad. I followed the instructions from this link: https://www.bitcraze.io/getting-started ... yflie-2-0/ but when I inserted the CrazyRadio PA and game pad into the USB ports, I moused over the USB icon so a message popped up "No USB device attached". It seems that the VM can't detect the USB devices attached. Could please you please provide any help for this issue? Also, I noticed when I plug in my CrazyRadio into the USB port, there is no lighted up LED. is it normal , no lighted up LED on hardware piece?
Many thanks,
Robert
[SOLVED] CrazyRadio is not detected by BitcrazeVM
Re: CrazyRadio is not detected by BitcrazeVM
Hi Robert,
For the VM, what operating system are you running? If you are on linux there is some extra step to allow the VM to access USB devices: https://stackoverflow.com/questions/200 ... linux-host. Then you need to right click on the USB icon to attach a USB device.
For the Crazyradio, it is normal that all LED are OFF when it is connected to the PC. Though both LED should blink when you are connecting it.
/Arnaud
For the VM, what operating system are you running? If you are on linux there is some extra step to allow the VM to access USB devices: https://stackoverflow.com/questions/200 ... linux-host. Then you need to right click on the USB icon to attach a USB device.
For the Crazyradio, it is normal that all LED are OFF when it is connected to the PC. Though both LED should blink when you are connecting it.
/Arnaud
Re: CrazyRadio is not detected by BitcrazeVM
Hi Arnaud,
I fixed my problem.
Many thanks for your help!
Robert
I fixed my problem.
Many thanks for your help!
Robert
Re: CrazyRadio is not detected by BitcrazeVM
I marked this as solved, just for posterity.
Crazyflier - my CF journal...
4x Crazyflie Nano (1.0) 10-DOF + NeoPixel Ring mod.
3x Crazyflie 2.0 + Qi Charger and LED Decks.
Raspberry Pi Ground Control.
Mac OS X Dev Environment.
Walkera Devo7e, ESky ET6I, PS3 and iOS Controllers.
4x Crazyflie Nano (1.0) 10-DOF + NeoPixel Ring mod.
3x Crazyflie 2.0 + Qi Charger and LED Decks.
Raspberry Pi Ground Control.
Mac OS X Dev Environment.
Walkera Devo7e, ESky ET6I, PS3 and iOS Controllers.