I have the nRFgo board and SDK and would like to use them with the Crazyradio. The pinout for the ISP is different and even after jumpering to the correct pins, the Crazy radio is not recognized by the nRFgo Studio. I hope there is an easy solution, but any help would be appreciated.
Thanks
UPDATE: It looks like many have read my question, but as yet no answers. Are people "programming" the Crazyradio or just loading commands for the copter? If anyone is programming, what is being used as an ISP host if not nRFgo?
More thanks
Program Crazyradio with nRFgo
Re: Program Crazyradio with nRFgo
Hi,
I made my own programmer using an FTDI jtag addapter to program the Crazyradio. I have no experience with nrf-go but in theory just connecting the right pin together should do the trick. I connect the SPI pins, reset and boot to the FTDI to program the Crazyradio.
I made my own programmer using an FTDI jtag addapter to program the Crazyradio. I have no experience with nrf-go but in theory just connecting the right pin together should do the trick. I connect the SPI pins, reset and boot to the FTDI to program the Crazyradio.