Problem when building code: MAKE CLOAD
Posted: Tue Mar 23, 2021 5:09 pm
Hello,
I have bought the crazyflie 2.1 and have been able to fly it through my samsung mobile and through a gamepad using the VM that you have made available. I am working using the VM and now I would to go a little bit further. That is why I am following the "Getting started with development": https://www.bitcraze.io/documentation/t ... velopment/
Things go wrong when I want to build the source code after the small change in led.h
Things go wrong when "MAKE CLOAD". I have the following message:
make all DEBUG=0 CLOAD=1
CLEAN_VERSION
make[1]: *** No rule to make target 'list.o', needed by 'cf2.elf'. Stop.
Makefile:397: recipe for target 'build' failed
make: *** [build] Error 2
18:02:00 Build Failed. 3 errors, 0 warnings. (took 4s.3ms)
FYI: I have been able to download and update the latest firmware (firmware-cf2-2021.03-rc4.zip) in the crazyflie as explained under:
https://www.bitcraze.io/documentation/t ... fig-client
The latest update works fine and I can connect and fly the crazyflie.
Can anyone help me ?
Thanks. Franky
I have bought the crazyflie 2.1 and have been able to fly it through my samsung mobile and through a gamepad using the VM that you have made available. I am working using the VM and now I would to go a little bit further. That is why I am following the "Getting started with development": https://www.bitcraze.io/documentation/t ... velopment/
Things go wrong when I want to build the source code after the small change in led.h
Things go wrong when "MAKE CLOAD". I have the following message:
make all DEBUG=0 CLOAD=1
CLEAN_VERSION
make[1]: *** No rule to make target 'list.o', needed by 'cf2.elf'. Stop.
Makefile:397: recipe for target 'build' failed
make: *** [build] Error 2
18:02:00 Build Failed. 3 errors, 0 warnings. (took 4s.3ms)
FYI: I have been able to download and update the latest firmware (firmware-cf2-2021.03-rc4.zip) in the crazyflie as explained under:
https://www.bitcraze.io/documentation/t ... fig-client
The latest update works fine and I can connect and fly the crazyflie.
Can anyone help me ?
Thanks. Franky