How to mount propellers A1 and B2 on crazyflie 2.0

Firmware/software/electronics/mechanics
Post Reply
anaimp
Beginner
Posts: 7
Joined: Wed Oct 18, 2017 7:43 am

How to mount propellers A1 and B2 on crazyflie 2.0

Post by anaimp »

Hi everybody,
I'm Anastasia from University of L'Aquila. I'm dealing with a project on crazyflie 2.0 and I have to mount the propellers B2 and A1 type on the crazyflie.
I would like to know how to mount them, I mean what their configuration on the crazyflie should be?
Bye everyone,
Anastasia
arnaud
Bitcraze
Posts: 2538
Joined: Tue Feb 06, 2007 12:36 pm

Re: How to mount propellers A1 and B2 on crazyflie 2.0

Post by arnaud »

Hi,
This is documented in the Getting started documentation: https://www.bitcraze.io/getting-started ... infostep15

There is two types of propeller, conter clockwise and clockwise, the rotation direction is indicated on the Crazyflie PCB. Visually you can find which propeller will product thrust upwards when rotated with the convex part on the top.
Post Reply