Unofficial CrazyFlie 1.0 Firmware Binary (2015-01)

Firmware/software/electronics/mechanics
Post Reply
poizone
Member
Posts: 59
Joined: Thu Feb 05, 2015 3:59 am
Location: Ohio, USA

Unofficial CrazyFlie 1.0 Firmware Binary (2015-01)

Post by poizone » Thu Feb 12, 2015 3:03 am

I noticed the current firmware build on the wiki is 2014.01. I've just built the master branch, and figured I'd post the current 2015.01 binary for everyone to use.

PLEASE NOTE:
This has been tested to connect and work on the Crazyflie 1.0 ONLY. This is the vanilla build from the Bitcraze master. If this build happens to work on the Crazyflie 2.0, let me know. This binary should be flashed and used with the latest client from https://github.com/bitcraze/crazyflie-clients-python

WARNING:
Flashing this binary means you accept that I'm not responsible for any damage caused by anything, including but not limited to interrupted flashing, freak EMP blasts, flashing on untested devices, and acts of any supreme or non-supreme beings. There is no warranty available from me, and where laws require there to be a warranty, you are entitled to ask me questions and maybe get a meaningful response. If you decide to use those laws to sue me, I'm in college and you won't get much out of me.

Hosted on my Google Drive
https://drive.google.com/file/d/0B5beGF ... dRRE0/view (2015.01) Built on 2015-02-11 at 21:41 MD5: 72048d638373229426ee8568dff7d64e


One day our flies will drown out the sun in an autonomous Skynet of whirring motors and blinking lights.

Post Reply