Page 1 of 1
Crazyflie stops booting with a Flow Deck V2
Posted: Tue Jan 21, 2020 7:33 am
by romi01
Whenever I plug in a Flow Deck, the Crazyflie v2 only lights up two leds, one blue and one red. When I disconnect the Flow Deck, the Crazyflie starts up normally. Is something wrong with my Crazyflie?
Re: Crazyflie stops booting with a Flow Deck V2
Posted: Thu Jan 23, 2020 10:02 am
by kimberly
That is not good indeed, but there is probably something wrong with your flowdeck. Are you sure that the flowdeck was mounted on correctly like explained in here ?
https://www.bitcraze.io/docs/cf2_expansiondecks/. Has it every worked before?
Could you connect to the crazyflie though the cfclient and copypaste the output in this forum thread?