Crazyflie stops booting with a Flow Deck V2

Post here to get support
Post Reply
romi01
Beginner
Posts: 1
Joined: Sat Jan 10, 2015 6:48 pm

Crazyflie stops booting with a Flow Deck V2

Post by romi01 » Tue Jan 21, 2020 7:33 am

Whenever I plug in a Flow Deck, the Crazyflie v2 only lights up two leds, one blue and one red. When I disconnect the Flow Deck, the Crazyflie starts up normally. Is something wrong with my Crazyflie?



kimberly
Bitcraze
Posts: 217
Joined: Fri Jul 06, 2018 11:13 am

Re: Crazyflie stops booting with a Flow Deck V2

Post by kimberly » Thu Jan 23, 2020 10:02 am

That is not good indeed, but there is probably something wrong with your flowdeck. Are you sure that the flowdeck was mounted on correctly like explained in here ? https://www.bitcraze.io/docs/cf2_expansiondecks/. Has it every worked before?

Could you connect to the crazyflie though the cfclient and copypaste the output in this forum thread?

Post Reply