I got my hands on a Crazyflie10 DOF.
I installed the current APP on my old Nexus 7 (2012) and I also flew with the Crazyflie.
When connecting to crazyflie 10 DOF, I have this output in the PC client:
Code: Select all
IMU: MS5611 I2C connection [OK].
MPU6050: Self test [OK].
HMC5883L: Self test [OK].
MS5611: Self test [OK].
There is how it should be done!
https://wiki.bitcraze.io/doc:crazyflie: ... re_upgrade
Code: Select all
For Crazyflie 1.0 now power it on within 5 seconds using the battery (not USB), the booloader should now connect Press “Browse” and select the binary you want to download (e.g. cflie.bin). Note: A *.bin file will be flashed to the STM32xxx only. Or select a zip file containing firmware for both nRF51 and STM32F405 for Crazyflie 2.0 as well as firmware for the STM32F103 for the Crazyflie 1.0.
Press “Program” and wait
Press “Restart in firmware mode”
To check the firmware version, under the View menu, open up Tabs→Console tab and look at the output when connecting to the Crazyflie 1.0/2.0.
I use the current crazyflie-clients-python on a Debian-9 system. I have not connected a game controller because I actually want to use the APP. But no firmware update works with the APP either.
A crazyflie is never found in bootloader mode! Logically, this is in any case because the button on the crazyflie does not work and therefore everything else.
The button on my crazyfly unfortunately has no function for bootloaders.
Where's the problem with my crazyfie10 DOF On/Off Button?
Thank you for your attention