How can I flash the original bootloader to Crazyflie 2.0?

Post here to get support
Post Reply
cboustead
Beginner
Posts: 11
Joined: Tue Feb 05, 2019 9:33 pm

How can I flash the original bootloader to Crazyflie 2.0?

Post by cboustead »

When I first got the crazyflie I flashed the PX4 flight controller to it, which include flashing a new bootloader.

Now don't want to use PX4, I need to get the original crazyflie bootlader and flight controller flashed back onto it. However, when I follow the 'Getting started with crazyflie 2.X' on the BitcrazeVM, I connect with the bootloader but get 'Programming Failed!' when "Program' is selected. The leds flash randomly, including blue, green and red. Somethings is wrong here.

Is it possible to flash the original bootloader? Dfu mode purhaps?
tobias
Bitcraze
Posts: 2339
Joined: Mon Jan 28, 2013 7:17 pm
Location: Sweden

Re: How can I flash the original bootloader to Crazyflie 2.0?

Post by tobias »

There are some short instructions in this post how to flash it in DFU mode.
Post Reply