CF2-Kalman-2017-05.bin too big to flash
Posted: Sat Sep 15, 2018 7:08 pm
I am flashing from bitcrazeVM after downloading pre-compiled version
cf2-kalman-2017.05.bin
from github (a la direction from "arnaud" in another post).
I am getting "data too big to falsh" when I flash thru crazyradio.
(1)
python3 usbtools/nrfbootload.py flash crazyflie-firmware/cf2-kalman-2017.05.bin
Found nRF24LU1 bootloader version 18.0
Flashing:
Flashing 197292 bytes...
Traceback (most recent call last):
File "usbtools/nrfbootload.py", line 135, in <module>
if bl.write(fileData):
File "/home/bitcraze/projects/crazyradio-firmware/usbtools/NrfUsbBootloader.py", line 124, in write
raise Exception("Data to be written too big!")
Exception: Data to be written too big!
Sorry, if this has been resolved, but I couldn't find a post addressing this issue.
Thanks for your help
Satya
cf2-kalman-2017.05.bin
from github (a la direction from "arnaud" in another post).
I am getting "data too big to falsh" when I flash thru crazyradio.
(1)
python3 usbtools/nrfbootload.py flash crazyflie-firmware/cf2-kalman-2017.05.bin
Found nRF24LU1 bootloader version 18.0
Flashing:
Flashing 197292 bytes...
Traceback (most recent call last):
File "usbtools/nrfbootload.py", line 135, in <module>
if bl.write(fileData):
File "/home/bitcraze/projects/crazyradio-firmware/usbtools/NrfUsbBootloader.py", line 124, in write
raise Exception("Data to be written too big!")
Exception: Data to be written too big!
Sorry, if this has been resolved, but I couldn't find a post addressing this issue.
Thanks for your help
Satya