Alt.Hold not working correctly / bad baro values
Posted: Sat Dec 30, 2017 12:11 am
Hello,
I now have purchased a CF2, and it is a very cool quad, but I can not get the alt.hold working.
It hovers just centimeters over ground and does little "jumps", I guess due to the ground effect.
Everytime when I get some height (~2 meters) and press the "assisted control" button on my controller, it drops down to the ground and hovers there.
(The button itself is working, otherwise the thrust would drop to zero).
Is this a common problem?
So far I found nothing.
How can I read the raw baro-values? in the cfclient under baro is "z.stateEstimate", which is after sensor fusion I guess.
Edit: crazyflie-2017.06.zip is flashed
I now have purchased a CF2, and it is a very cool quad, but I can not get the alt.hold working.
It hovers just centimeters over ground and does little "jumps", I guess due to the ground effect.
Everytime when I get some height (~2 meters) and press the "assisted control" button on my controller, it drops down to the ground and hovers there.
(The button itself is working, otherwise the thrust would drop to zero).
Is this a common problem?
So far I found nothing.
How can I read the raw baro-values? in the cfclient under baro is "z.stateEstimate", which is after sensor fusion I guess.
Edit: crazyflie-2017.06.zip is flashed