[SOLVED] IMU: HMC5883L I2C connection [FAIL]

Post here to get support
Post Reply
EverInfinity
Beginner
Posts: 3
Joined: Sun May 26, 2013 2:06 pm

[SOLVED] IMU: HMC5883L I2C connection [FAIL]

Post by EverInfinity »

SYS: Crazyflie is up and running!
SYS: Build 31:ba1d111112ad (2013.4) CLEAN
SYS: I am 0x8711205354568549671FF50 and I have 128KB of flash!
IMU: MPU6050 I2C connection [OK].
IMU: HMC5883L I2C connection [FAIL].
IMU: MS5611 I2C connection [FAIL].
MPU6050: Self test [OK].

Can anyone tell me what/why those two tests are failing?
skube
Member
Posts: 55
Joined: Fri May 03, 2013 2:41 pm
Location: Toronto, Canada

Re: IMU: HMC5883L I2C connection [FAIL]

Post by skube »

Do you have the 6-DOF version of the Crazyflie? If so, that would explain it.
Crazyflie Nano 10-DOF | AR Drone v1 | MikroKopter Okto
EverInfinity
Beginner
Posts: 3
Joined: Sun May 26, 2013 2:06 pm

Re: IMU: HMC5883L I2C connection [FAIL]

Post by EverInfinity »

Hehe >_>

Yes...thank you!
tobias
Bitcraze
Posts: 2339
Joined: Mon Jan 28, 2013 7:17 pm
Location: Sweden

Re: IMU: HMC5883L I2C connection [FAIL]

Post by tobias »

I have realizes that this printout might be a bit misleading. We should probably change it to [UNAVAILABLE] instead of [FAIL].
Post Reply