soldering/desoldering help
soldering/desoldering help
Yikes, this thing is tiny! I've never tired to solder something so small. While trying to get my giant soldering iron tip in place to solder M1's wires, I managed to bridge 2-3 pins of the STM controller. Any advice for removing the solder bridges without damaging the chip?
Re: soldering/desoldering help
This sometimes happens when working in tight spaces (especially with an oversized iron/tip). First thing to do is locate a more appropriate soldering iron and/or tip, some (fine braid) solder wick and some liquid flux.
Then check out these videos:
https://www.youtube.com/watch?v=8yyUlABj29o
https://www.youtube.com/watch?v=eg2hxpy--gg
Find an older board, such as a spare nic or sound card to practice on first. Then dive in.
Then check out these videos:
https://www.youtube.com/watch?v=8yyUlABj29o
https://www.youtube.com/watch?v=eg2hxpy--gg
Find an older board, such as a spare nic or sound card to practice on first. Then dive in.
Re: soldering/desoldering help
Also, be sure to review the assembly instruction video here:
http://wiki.bitcraze.se/projects:crazyf ... s:assembly
http://wiki.bitcraze.se/projects:crazyf ... s:assembly
Re: soldering/desoldering help
Thanks... a smaller tip and some flux helped a lot to pull the extra solder out. Crazyflie works great, only problem now is my flying skills!