I'm using the GAP_SDK in docker within the crazyflie's VM. I'm trying to execute the PMSIS helloworld example on the AI deck processor but the execution ends up failing due to the following error:
Code: Select all
Launching execution with command:
gap8-openocd -c 'gdb_port disabled; telnet_port disabled; tcl_port disabled' -f interface/ftdi/olimex-arm-usb-tiny-h.cfg -f target/gap8revb.tcl -f tcl/jtag_boot_entry.tcl -c 'gap8_jtag_load_binary_and_start "/gap_sdk/examples/pmsis/helloworld/BUILD/GAP8_V2/GCC_RISCV/test" elf 0x1c000080'
Open On-Chip Debugger 0.10.0+dev-gb84d97ec4 (2021-07-15-09:59)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
DEPRECATED! use 'adapter speed' not 'adapter_khz'
DEPRECATED! use 'adapter driver' not 'interface'
Warn : Interface already configured, ignoring
TARGET create
Info : core 0 selected
0
Info : gap8_adv_debug_itf tap selected
Info : adv_dbg_unit debug unit selected
Info : Option 7 is passed to adv_dbg_unit debug unit
GAP8 INIT TARGET
Error: libusb_open() failed with LIBUSB_ERROR_NO_DEVICE
Error: no device found
Error: unable to open ftdi device with vid 15ba, pid 002a, description 'Olimex OpenOCD JTAG ARM-USB-TINY-H', serial '*' at bus location '*'
Traceback (most recent call last):
File "/gap_sdk/tools/gapy/gapy", line 162, in <module>
main()
File "/gap_sdk/tools/gapy/gapy", line 152, in main
operationFunc(args, config)
File "/gap_sdk/tools/gapy/run.py", line 146, in operationFunc
raise RuntimeError('Runner has failed with value: %d' % status)
RuntimeError: Runner has failed with value: -1
/gap_sdk/tools/rules/pulp_rules.mk:244: recipe for target 'run' failed
make: *** [run] Error 1
root@4f657d0612c8:/gap_sdk/examples/pmsis/helloworld#