my lighthouse deck does not dectect the LH2 basestations anymore. I think it is because the deck is not able to boot anymore in a correct way. Altough the LEDs are blinking correctly while starting the crazyflie and turn blue constantly when booted, the console log does not say "Locked to LH 2" anymore. The only message which comes from the LH deck is "LHFL: Firmware version 5 verified, booting deck!". I already flashed the CF with the original firmware from GitHub. Is my LH deck probably broken or is there any other way to fix it?
Console log:
Thank you for your help in advance.---
SYS: Crazyflie 2.1 is up and running!
SYS: Build 1:12cf59a535a8 (2020.09-rc2 +1) CLEAN
SYS: I am 0x20383347344D50080023001F and I have 1024KB of flash!
CFGBLK: v1, verification [OK]
DECK_CORE: 1 deck(s) found
DECK_CORE: Calling INIT on driver bcLighthouse4 for deck 0
IMU: BMI088 Gyro I2C connection [OK].
IMU: BMI088 Accel I2C connection [OK]
IMU: BMP388 I2C connection [OK]
ESTIMATOR: Using Kalman (2) estimator
CONTROLLER: Using PID (1) controller
MTR-DRV: Using brushed motor driver
EEPROM: I2C connection [OK].
IMU: BMI088 gyro self-test [OK]
STAB: Wait for sensor calibration...
SYS: Free LHFL: Lighthouse bootloader version: 2
heap: 11904 bytes
LHFL: Firmware version 5 verified, booting deck!
STAB: Ready to fly.