Radio Not Connecting
Posted: Tue Jan 14, 2020 3:54 am
Hi all,
My crazyradio has never been fully functioning, and I am not sure whether or not that is a manufacturer or user error. Until recently, the radio would connect to the drone for about 10 seconds, and then disconnect. I don't think the radio ever connected for more than 20 seconds. By the way, I am running the virtual machine on a macbook pro. As of three days ago, the client will no longer recognize that the radio is even plugged in. When I insert the radio into the usb port, it briefly flashes red, and then turns off. I am then left with these messages in the console:
Does this have something to do with the firmware? I am not very familiar with Linux so I cannot properly understand what the terminal is telling me. Thanks.
My crazyradio has never been fully functioning, and I am not sure whether or not that is a manufacturer or user error. Until recently, the radio would connect to the drone for about 10 seconds, and then disconnect. I don't think the radio ever connected for more than 20 seconds. By the way, I am running the virtual machine on a macbook pro. As of three days ago, the client will no longer recognize that the radio is even plugged in. When I insert the radio into the usb port, it briefly flashes red, and then turns off. I am then left with these messages in the console:
Code: Select all
INFO:cfclient.gui:Disabling STL printouts
INFO:cfclient.utils.input.inputreaders:Input readers: ['linuxjsdev', 'pysdl2']
INFO:cfclient.utils.input.inputreaders:Successfully initialized [linuxjsdev]
INFO:cfclient.utils.input.inputreaders:Could not initialize [pysdl2]: No SDL2 support on Linux
INFO:cfclient.utils.input.inputinterfaces:Found interfaces: ['leapmotion', 'wiimote', 'zmqpull']
INFO:cfclient.utils.input.inputinterfaces:Could not initialize [leapmotion]: Leap Motion library probably not installed (No module named 'leapsdk')
INFO:cfclient.utils.input.inputinterfaces:Could not initialize [wiimote]: Missing cwiid (wiimote) driver No module named 'cwiid'
INFO:cfclient.utils.config:Dist config read from /home/bitcraze/projects/crazyflie-clients-python/src/cfclient/configs/config.json
INFO:cfclient.utils.config:Config file read from [/home/bitcraze/.config/cfclient/config.json]
INFO:cfclient.utils.input.inputinterfaces:Could not initialize [zmqpull]: ZMQ input disabled in config file
INFO:cfclient.utils.zmq_param:Biding ZMQ for parameters at tcp://*:1213
INFO:cfclient.utils.zmq_led_driver:Biding ZMQ for LED driverat tcp://*:1214
INFO:cfclient.utils.input:Using device blacklist [(VirtualBox|VMware)]
INFO:cfclient.ui.main:Auto reconnect enabled: True
INFO:cflib.drivers.cfusb:Looking for devices....
INFO:cfclient.ui.tabs.QualisysTab:Switching Flight Mode to: FlightModeStates.DISCONNECTED
INFO:cflib.drivers.cfusb:Looking for devices....
INFO:cflib.drivers.cfusb:Looking for devices....
INFO:cflib.drivers.cfusb:Looking for devices....
INFO:cflib.drivers.cfusb:Looking for devices....
INFO:cflib.drivers.cfusb:Looking for devices....
INFO:cflib.drivers.cfusb:Looking for devices....
INFO:cflib.drivers.cfusb:Looking for devices....
INFO:cflib.drivers.cfusb:Looking for devices....
INFO:cflib.drivers.cfusb:Looking for devices....
INFO:cflib.drivers.cfusb:Looking for devices....