Page 1 of 1

Longer male deck connector

Posted: Thu Dec 19, 2019 12:40 pm
by chopin
Hello,
We are in need of longer male deck connectors (https://store.bitcraze.io/collections/s ... -connector)
The short ones are 10mm long, and the long ones are 14mm. We are looking for deck connectors which are about 19-20mm in length.
Did anyone find something like that? Even if the spacing between the pins is not as in the Crazyflie male deck connector (2mm), we can try pulling them out and inserting them into our existing female deck connector.
Alternatively, does someone know what is the name of this product? Because "pin headers" is too general, and "expansion deck connector" is way too specific...

Thanks a lot!

Re: Longer male deck connector

Posted: Sun Dec 22, 2019 10:49 am
by chopin
Any help, please?

Re: Longer male deck connector

Posted: Mon Dec 23, 2019 10:13 am
by kimberly
it's not great to find these, since there are several names for these. Pin pitch headers, male pin headers. If you would google 'pin strip male pin header pitch 2 mm', you are usually being referred to the Digikey or mouser websites that have these, where you can also search on length.

Let us know if this puts you in the right direction.

Re: Longer male deck connector

Posted: Sat Oct 02, 2021 3:31 am
by kylixz
I know I am way late on this thread but I just ordered some Samtec MTMM-110-15-T-S-700 header pins To try to stack a variety of decks on the Bolt.

Are there any longer options out there? Having trouble finding anything.

Thanks!

Re: Longer male deck connector

Posted: Mon Oct 04, 2021 9:04 am
by arnaud
I am not sure how long are the pin you found, but we are now selling longer pins since this thread was started: https://store.bitcraze.io/collections/s ... -connector.

Re: Longer male deck connector

Posted: Thu Oct 07, 2021 12:51 pm
by kylixz
Arnaud,

Thanks -- I ordered a few custom from some shops that are a bit longer to try out. Working through a 18650 build with the Bolt and want to stack the AI Deck and multi ranger ontop.

Will let you know if they work out!