self checking

Discussions about all things Bitcraze
Post Reply
Posts: 7
Joined: Sat Oct 27, 2018 12:36 pm

self checking

Post by harriswang »

when i connect the power supply,the cf cannot self check.and the guiding M2 is always bright,but others are not bright.what should i do?
thank u!
Posts: 2302
Joined: Tue Feb 06, 2007 12:36 pm

Re: self checking

Post by arnaud »

Sounds like you need to re-flash your Crazyflie using the bootloader. If everything is blocked, the way to re-launch the bootloader is:
1) Disconnect the battery
2) Press the power button
3) Connect the battery while the button is pressed
4) As soon as the M2 Blue LED starts blinking, release the button

Now both blue LEDs should blink and if so you will be able to flash the Crazyflie using the Crazyflie client.
Post Reply