Range increased in latest firmwares

Announcement forum for the Loco positioning development and related code (Kalman filter, controller, ...).

Subscribe to this forum if you want to be informed of breaking change and improvements.
Post Reply
Posts: 1181
Joined: Tue Feb 06, 2007 12:36 pm

Range increased in latest firmwares

Post by arnaud » Fri Mar 24, 2017 7:59 am

We have just run some range tests on the LPS system and our findings are documented in the wiki: https://wiki.bitcraze.io/misc:investiga ... -max-range

The result of this experiment is that we now have enabled the so-called "Smart Power" mode of the DW1000 radio. This allows to increase the output power with the assumption that we send less than one packet per milliseconds (the authorized transmit power is defined in 1 milliseconds slot, so if you send only one packet shorter than a millisecond this packet can have more power).

Range was not a problem for small-ish system but for slightly bigger system this change can improve greatly the performance of the system.

Post Reply