Cannot see the Anchors' status

All discussions related to the Loco Positioning system
Post Reply
pimpam
Beginner
Posts: 19
Joined: Fri Aug 07, 2020 8:07 am

Cannot see the Anchors' status

Post by pimpam »

Hi! I have tried to configuring the LPS and everything works well except I cannot see the anchors' status show up on Crazyflie Client as the tutorial from website (https://www.bitcraze.io/documentation/t ... ng-system/).

This is from the website.
Screenshot 2020-10-16 165711.png
And this is what I got!
Screenshot 2020-10-16 165422.png

Does anyone can help me on this?

Thank you.
kimberly
Bitcraze
Posts: 1050
Joined: Fri Jul 06, 2018 11:13 am

Re: Cannot see the Anchors' status

Post by kimberly »

The screenshot is from an outdated cfclient. But the status indication is the same.

Under anchors you see 8 numbers in a green or red block. Red means that the crazyflie can't find it, because the anchors is in a different ranging method (TWR.TDOA2 or 3) than the crazyflie, or that it does not exist.

How many anchors are you using in your setup? 6 or 8
pimpam
Beginner
Posts: 19
Joined: Fri Aug 07, 2020 8:07 am

Re: Cannot see the Anchors' status

Post by pimpam »

Sorry for late reply. At that time, I use 6 anchors. I understand what you mean. I will update the cfclient. Thanks a lot!
Post Reply