More Than 8 Anchor in TDoA 3

All discussions related to the Loco Positioning system
Post Reply
Risee
Beginner
Posts: 3
Joined: Mon Jul 29, 2019 11:51 am

More Than 8 Anchor in TDoA 3

Post by Risee » Thu Feb 06, 2020 12:45 pm

Hi all

I want to try TDoA 3 mode with more than 8 anchor

my current setup is like in the below image

Image

How should i place more than 8 anchors (for example i want to place 12 anchor)

Where should i place anchors 8,9,10,11

https://imgur.com/a/EjbR9e5



kristoffer
Bitcraze
Posts: 209
Joined: Tue Jun 30, 2015 7:47 am

Re: More Than 8 Anchor in TDoA 3

Post by kristoffer » Fri Feb 07, 2020 7:31 am

Hi!

If you have a space that is "longer" in one direction, you should put them along the longest axes, close to the edge of your space. In your example between 0-5, 2-7, 3-6 and 1-4.

If you don't mind anchors in the middle of the floor, you could add them on the center of the walls (2-7-3-6 and 0-1-5-4), the ceiling and floor.

You can try to add one anchor at a time to see how many you need. It might for instance be enough to add two anchors on the floor (easier than in the ceiling).

Post Reply