- https://github.com/bitcraze/crazyflie-firmware.git This was the firmware I was using to flash the crazyflie.
- I have made changes with the dwm_loc_ekf_multi_hover.launch and it was working without error but not accurately sometimes . like behaving crazy and not taking off or moving out of the field and hitting walls.
- For crazyflie Ros I was using the latest master-branch version.
Right now I have 6 anchors from 0-5. As mentioned in the https://wiki.bitcraze.io/doc:lps:tdoa that I can use 8 anchors from 0-7. i added the 7th and 8th anchor to the anchor_pos.yaml. And when i run the command
roslaunch bitcraze_lps_estimator dwm_loc_ekf_multi_hover.launch uri0:=radio://0/30/250K/E7E7E7E701 uri1:=radio://0/30/250K/E7E7E7E702
then is was showing that there was error with anchor 6 and anchor 7 which are 7 and 8.
And also I have a question about dwm_loc_ekf_swarm_hover.launch. I has a code for 5 CF's can I use less than 5 or more than 5 for that or any restrictions are there to this launch file.
Thank you,
Appala Chekuri.