hi, all:
about tdoa mode, the current anchor address 1~7, named as group 1, if we have two zone nearly, add anchor 8~F, named as group2,
group1 maybe affect the 2, how to avoid the interfere? if more groups, how to do ?
add more anchors, more group
Re: add more anchors, more group
Hi,
If you want to have nearby system working independently you need to have them on different channel and/or preamble settings.
If you want to have nearby system working independently you need to have them on different channel and/or preamble settings.
-
- Expert
- Posts: 186
- Joined: Mon Dec 28, 2015 5:07 am
Re: add more anchors, more group
hi, arnaud:
if crazyflie2 must receive the two groups ? different channel and /or preamble settings only receive a group.
crazyflie2 try swith to different settings? or other.
if crazyflie2 must receive the two groups ? different channel and /or preamble settings only receive a group.
crazyflie2 try swith to different settings? or other.
Re: add more anchors, more group
If you are in TWR, Crazyflie can switch channel and preamble when talking to the anchor, this would be one good way to improve the TDMA performances. If in TDoA mode though it is much mode difficult since you can only listen to one preamble/channel at one time.