PCB thickness

Discussions and questions about the Crazyflie Nano Quadcopter
Post Reply
exapod
Beginner
Posts: 1
Joined: Wed Jan 15, 2014 6:02 pm

PCB thickness

Post by exapod » Wed Jan 15, 2014 6:07 pm

Hi,
i'm building a similar quadcopter but using a PIC32 and i want to use the same motor and motor mount of the crazyflie and i would like to know what is the thickness of the pcb so the motor mounts will fit. I didn't find this info on the wiki page.
Thanks

tobias
Bitcraze
Posts: 1677
Joined: Mon Jan 28, 2013 7:17 pm
Location: Sweden

Re: PCB thickness

Post by tobias » Thu Jan 16, 2014 9:27 am

It is a standard 1.6mm thick PCB.

Fazal Khan
Beginner
Posts: 3
Joined: Tue Sep 19, 2017 7:59 am

Re: PCB thickness

Post by Fazal Khan » Wed Oct 04, 2017 10:03 am

Hello,

Can you tell me what is the scale (dimensions) of your quadcopter? I am also want to build similar quadcopter like CF with STM32F103C8T6 controller. Are you also starting from 0 or if you can please tell me where can I find ready made PCB and stuff?

Thanks

Post Reply