Hi,
Will the crazyflie 1.0 motor mounts listed here (https://store.bitcraze.io/products/craz ... otor-mount) fit the crazyflie 2.1 board? Also, are these meant for 6mm diameter motors?
Thanks!
[Solved] Crazyflie 1.0 Motor Mount Compatibility
[Solved] Crazyflie 1.0 Motor Mount Compatibility
Last edited by bma on Fri Sep 04, 2020 4:18 pm, edited 1 time in total.
-
- Bitcraze
- Posts: 630
- Joined: Tue Jun 30, 2015 7:47 am
Re: Crazyflie 1.0 Motor Mount Compatibility
Hi!
Unfortunately CF1 motor mounts do not fit on a CF2.1.
They are designed for 6mm motors though.
Unfortunately CF1 motor mounts do not fit on a CF2.1.
They are designed for 6mm motors though.
Re: Crazyflie 1.0 Motor Mount Compatibility
I see. Do you have any suggestions for fitting the crazyflie 2.1 with 6mm motors?
-
- Bitcraze
- Posts: 630
- Joined: Tue Jun 30, 2015 7:47 am
Re: Crazyflie 1.0 Motor Mount Compatibility
I would try to use a CF2 motor mount (7 mm) and put some tape (or similar) around the 6 mm motor to make it a bit bigger.
Re: Crazyflie 1.0 Motor Mount Compatibility
I'll give that a shot.
Thanks for the help!
edit: I tried it and the tape + 7mm motor mounts works perfectly!
Thanks for the help!
edit: I tried it and the tape + 7mm motor mounts works perfectly!