[Solved] Crazyflie 1.0 Motor Mount Compatibility

Discussions and questions about the Crazyflie Nano Quadcopter
Post Reply
bma
Beginner
Posts: 12
Joined: Fri Jun 19, 2020 9:45 pm

[Solved] Crazyflie 1.0 Motor Mount Compatibility

Post by bma »

Hi,

Will the crazyflie 1.0 motor mounts listed here (https://store.bitcraze.io/products/craz ... otor-mount) fit the crazyflie 2.1 board? Also, are these meant for 6mm diameter motors?

Thanks!
Last edited by bma on Fri Sep 04, 2020 4:18 pm, edited 1 time in total.
kristoffer
Bitcraze
Posts: 322
Joined: Tue Jun 30, 2015 7:47 am

Re: Crazyflie 1.0 Motor Mount Compatibility

Post by kristoffer »

Hi!

Unfortunately CF1 motor mounts do not fit on a CF2.1.
They are designed for 6mm motors though.
bma
Beginner
Posts: 12
Joined: Fri Jun 19, 2020 9:45 pm

Re: Crazyflie 1.0 Motor Mount Compatibility

Post by bma »

I see. Do you have any suggestions for fitting the crazyflie 2.1 with 6mm motors?
kristoffer
Bitcraze
Posts: 322
Joined: Tue Jun 30, 2015 7:47 am

Re: Crazyflie 1.0 Motor Mount Compatibility

Post by kristoffer »

I would try to use a CF2 motor mount (7 mm) and put some tape (or similar) around the 6 mm motor to make it a bit bigger.
bma
Beginner
Posts: 12
Joined: Fri Jun 19, 2020 9:45 pm

Re: Crazyflie 1.0 Motor Mount Compatibility

Post by bma »

I'll give that a shot.

Thanks for the help!

edit: I tried it and the tape + 7mm motor mounts works perfectly!
Post Reply