Recognize connection with anchors and crazyflie

Discussions and questions about the Crazyflie Nano Quadcopter
Post Reply
song
Beginner
Posts: 15
Joined: Tue Jan 29, 2019 12:24 am

Recognize connection with anchors and crazyflie

Post by song »

hello, guys
Recently i'm trying to get position values from 10 crazyflies.
I wanna get postion of 10 points(nodes) simultaneously.

With 6 anchors and single radio dongle, I did power on 10 cf2. but it seems that it's not connected.
One of the cf2 is connected. but other's not.
Here's LED State:
- 2 BLUE LED on(M2, M3)
- 1 RED LED Blinking(M1)

but there's no led blinking on lps deck.

I tried to change address like 0xE7E7E7E7E7 --> 0XE7E7E7E701. But it didn't work.

how can i use multi crazyflies with single radio and same anchors.
tobias
Bitcraze
Posts: 2339
Joined: Mon Jan 28, 2013 7:17 pm
Location: Sweden

Re: Recognize connection with anchors and crazyflie

Post by tobias »

Have you manage to solve this? The cfclient can only connect to one at a time else ROS or Python lib would have to be used.
Post Reply